The touchscreen is easy and simple to use due to the graphical user interface.
DSS TOUCH is a control panel with support for managing functions such as switching on / off sections, entry / exit, and alarm management.
The panel also offers a card reader function, which allows it to be used for access control. The control panel supports new features through possible future software updates, that might occur.
DSS TOUCH is a vital part of the system, which makes security extremely important. The control panel (ACE) is Type A meaning any impact on the device will have no effect on the system. DSS TOUCH does not contain any decision logic, the device simply passes information to and from the CISS central unit. Additionally any kind of tempering will result in either temper alarms due to breakage protection, communication error with the central or both.
Even an exchange of the unit will result in an alarm. The device is required for the installation to meet the requirements for alarm classification 3/4.
DSS-TOUCH does not have its own inputs or outputs and communicates with central system through RS-485.
Nominal 12/24 VDC (11-30 VDC)
Max. 2,4W or 100mA at 24VDC. Normal 70mA
116 x 107 x 26 mm
-10 ͦ C – +40 ͦ C, 0-95% air dampness
-10 ͦ C – +50 ͦ C, 0-95% air dampness
Graphic display for indication and manoeuvring, Resolution 480 x 272 pixels, Resistive touch panel
Speaker for indication and feedback
1 pcs. RGB-LED in the front, 2 pcs. LED voltages, 2 pcs. LED RS485 (Rx/Tx)
RS485 1 x RS485-port (to overlying device)
MIFARE®® Classic (UID/block data, A/B-key), MIFARE® DESFire EV1 (UID/file data, 3DES/AES)
USB 1 pcs. micro-USB-port (connect to PC to update)
EN-61000-6-3 (resident.), EN-61000-6-2 (indust.)
Complies the RoHS directive
CISS DSS TOUCH, Console